purchasing and using steel for projects

Keep Your Asphalt Paver In Solid Condition With These Tips

Asphalt remains one of the most popular materials in the world when it comes to creating new pavement. Asphalt is recyclable and relatively easy to put down when compared with concrete or brick, making it the pavement material of choice for homeowners all over the world as well as commercial property owners looking to put down a parking lot. If you run an asphalt paving business, your asphalt paver machines are absolutely critical to your ability to get the job done. If you want to extend the life of your pavers and avoid having to go on the hunt for asphalt machine parts in order to complete a repair, here are some tips to keep in mind.

Start and End Every Day With an Inspection

Asphalt pavers can handle quite a bit of work throughout a typical day, but these pavers do require an eye towards maintenance and care if you want to ensure they remain in top condition. Get into the habit of inspecting each part of the paver every day, both before you start a new job and before you put it into storage for the evening once the work is completed. In particular, you want to look for things like signs of an oil leak or a fastener that has come loose and is jostling around. Tighten things up as needed and you should be able to get through another day without incident.

Remove Excess Asphalt After Every Job

Your asphalt paver does an excellent job of getting your hot asphalt down across the pavement with ease. But while most of the asphalt will end up on the ground, all pavers will have at least a little bit of excess asphalt left within the machinery itself after the end of a work day. It is important that you do what you can to remove this excess asphalt in order to prevent additional wear and tear to the equipment. Don't try and remove the asphalt right after a job is done, as the machinery and asphalt will still be very hot and you could burn yourself. But after you are done with your last job for the day, give the machine some time to cool and then make sure you wipe away any remaining asphalt within the device itself.

Make Sure It's Level

Finally, always inspect the screed on the ground where the new pavement is going to go before you begin work. Uneven ground could lead to problems for the paver as it tries to move across the screed. Take the time to redo the screed because if you don't, you're going to have to redo the whole thing eventually anyway once you finish your first pavement run and realize it's not even.

If your asphalt paver has seen better days, turn to an asphalt machine parts supplier for assistance